When you think about your ideal house, we’re sure that you have certain wishes for each room individually. Just as a bedroom should exude warmth and comfort, a bathroom should be an ideal place to relax and refresh at the start of the day, right?
Now imagine that during the cold winter days you have the opportunity to stand from the shower on a warm surface, or a floor that warms your feet. Wonderful, isn’t it? We are not talking about a sauna, we are talking about a bathroom that each of you can have. The key is in the underfloor heating system.
This pleasant atmosphere in the bathroom, thanks to this system, we all could have very easily. But like before every renovating process, before this one as well, you should follow certain steps and know which things to pay attention to before installing underfloor heating in your bathroom. So let’s see what we all should know.
1. Check your bathrooms floor type
The question of great importance is what type of floor you have in your bathroom. If you have concrete floor, isolation with support plates is necessary before installing this system. The heaters are glued directly, and there is a possibility of needing a waterproof membrane for the system to function properly. The most acceptable type of floor to install this system is floating floors. It allows the easiest installation of this system.
After installing the heating, you can choose whether to cover it with laminate, wood, tiles, it’s up to you. The advice is the following: let the top layer be the floor covering that best captures and retains heat. With the help of Bath1 you will get many new ideas for your bathroom regarding this method of heating.
2. Check the measures
Before installing underfloor heating, be sure to measure the bathroom well. What should not be done is to take wall-to-wall measures. Keep in mind that neither large nor small elements in your bathroom, as well as sanitary facilities, will need underfloor heating. If you do not take this into account, you will only throw money at an unnecessary amount of heaters.
Take care to make a distance of about 5 cm between the walls, sanitary elements and heaters, as they must never be in contact.
3. Test the system functioning before the installation
Before installing this heating method, be sure to check its correctness. Check that the pipes will function under pressure and that the insulation boards will interfere with their operation. Think of this as an investment, so that before installation, everything must function perfectly as a unity. Only in this way you can be sure that your underfloor heating will last for over 20 years.
4. Lower costs and efficiency of use
The first thing that crosses your mind when you thought about underfloor heating in most cases is “oh, that would be nice but it must cost a fortune.” No, you’re wrong. If it’s used properly, this heating method can save you up to 30% on your electricity bills, which means it can use up to 40% less electricity than traditional heaters.
Wondering how this is possible? Since this system heats evenly under your bathroom, there is no need to keep it turned on all the time. This is a modern way of heating and therefore, some of them have an automatic mode, which means that there can be no floor overheating, so there’s no higher energy consumption. Also, another relief of using this heating system is that it can be controlled via the app on your smart, which gives you the freedom to heat your bathroom in a specific period.